Color = level, dotted = derived. Click a school
name for its source. LAUSD is published geometry; Santa Monica is real but
2015–16 vintage; Culver City is inferred from the district's address
listing, so its edges are approximate. Boundaries never override Zones of
Choice, magnets, charters or permits.
Dotted = on foot only. Dashed = bikes too. Bold = a bridge with
no cars; ladder = public stairs; ring = official beach access. Tap any one for
what it is and who can use it. Paths are community-mapped, so one nobody has
added is simply missing — blank is not proof there is no way through.
Posted rules only. Los Angeles publishes its permit districts as areas; Santa
Monica and Culver City publish the rule for each block. Every street draws each street with a rule found in public data (zoom in, tap a street). Where a city publishes nothing, the map shows
nothing — that is not a sign the street is unrestricted. The sign on the block is always the authority.
Aircraft noise, 24-hour average
45 dB50556070 and up
A US DOT model (2022) of average aircraft noise over 24 hours. It shows where planes are audible on average, well beyond the airports' official 65 dB line. It leaves out planes passing high overhead, helicopters and nighttime peaks. The DOT says to use it to compare areas, not to judge one address.
Permits & time limits
LA permit districtBlock with a posted rule (Santa Monica, Culver City)
Posted rules only, as each city publishes them: LADOT districts (file of Apr 2024), Santa Monica block rules,
Culver City permit streets (Apr 2026). Tap one for the rule. No line or shade means the city publishes nothing there,
not that parking is unrestricted. The sign on the block is the authority.
Street sweeping day
MonTueWedThuFriSat/Sun
Two thin lines side by side: LA posts each side of the street on a different day. No line means none of the four agencies publishes a posted schedule there, not that the street is never swept. The sign on the block is always the authority. Culver City's nighttime routes aren't published as data yet.
Homes near a freeway
none20%+
Share of homes on, or one street off, a freeway or expressway, measured from each building’s outline along the street grid. This measures distance, not loudness. "None" is a real result.
Distance from a busy road or freeway
on the roadtwo streets off
Freeways and boulevards start deep red; medium-busy avenues start a step lighter. Each band is about one street: on the road, one street off, two streets off (wider for freeways), then plain map. Roads: LA City Mobility Plan (Boulevards, Avenues I–II) and the County highway plan. This shows distance, not loudness: hills, walls and traffic volume aren’t in it. Click a neighborhood for its measured share of homes at each distance. Aircraft noise is its own layer.
Street trees per mile of street
under 60145+
Street trees on record in the City of Los Angeles and Santa Monica inventories (Santa Monica: trees in the parkway, tree wells and medians only, not its parks), counted against the same street length the canopy figure uses; the corridor sub-neighborhoods are measured along their own road. Empty tree wells are not counted. Culver City and Ladera Heights publish no inventory, so they stay blank — that is missing data, not an absence of trees. LA City publishes no date with its inventory.
Zoom in and each street takes its own colour: street trees per 100 ft. Closer still, every street tree is a dot (tap one). Streets in Culver City and county areas stay uncoloured: no public inventory, not zero trees.
Trees: cover over the streets
under 10%30%+
Share of an 80-ft-wide strip down the middle of the streets that sits under canopy. Where no street figure exists yet the whole‑area figure is shown instead.
Zoom in and each street takes its own colour: the share of the street and about 40 ft either side under canopy. Closer still, the canopy itself appears, with each street tree in the LA City and Santa Monica inventories as a small dot. Tap a street to see what grows on that block. Canopy from the county’s 2023 aerial survey (LARIAC7), every tile checked against the county’s own pixel count.
Elevation
labelled, every 100 ft
between them, every 50 ft
Lines close together mean steep ground; far apart means flat. Heights come from the houses, so the contours exist only where houses do — a line stopping at a park, canyon or runway is the data ending, not a gap.
Loading the map…
Pinned
Side by side
Comparison
These are the things listing sites don't show you. Everything on this page comes
from public sources or Nate's own knowledge — for what a specific home actually closed at, or what's
about to come up, that's a quick text to me.
Addresses side by side
Compare addresses
The nearest of each, measured the way you picked: walking or driving along real streets, or a straight line.